Tools & Accessories |
For further details please contact us on 0870 428 0075 |
The ANT/CO/BS7967 appliance probe kit from Anton has been designed to sample combustion products to include cookers, grills and flueless appliances, as outlined in BS7967:2005 / CPA1 and can be used with most flue gas analysers on the market.
|
 |
Includes |
ANT/CO/BS7967 |
| Right- angled probe with 5 sampling holes |
• |
| Cooker probe with supporting discs |
• |
| 1 metre of black nitrile hose |
• |
| FIL29001 inline filter housing |
• |
| Price ex VAT |
£89.00 |
|
|
The Anton ASK1 tool kit was designed to provide standard tools that are required on a daily basis by the heating engineer, the kit is ideally suited for the new apprentice to start him on his way or just to replace old tools. The robust Bahco bag has plenty of room to hold further tools and the separate compartments will help with tool organisation. All products in this kit can be purchased separately.
|
 |
Includes |
ASK1 |
| APC15 - Anton 15mm pipe cutter |
• |
| APC22 - Anton 22mm pipe cutter |
• |
| ALRSS - Anton screwdriver set |
• |
| ARVL - Anton radiator wrench |
• |
| ATM-5 - Anton tape measure |
• |
| |
AKR - Anton key ring |
• |
| |
Bahco 2971G - Bahco pump pliers |
• |
| |
Bahco 9031 - Bahco wide jaw wrench |
• |
| |
Bahco tool bag |
• |
| |
Price ex VAT |
£99.00 |
|
|
The Anton ASBK kit was designed to provide all relevant tools and accessories required for 15 and 22mm pipe preparation and soldering, all in one handy kit.
The robust Bahco bag has plenty more room to hold fittings, flux, solder wire etc
All products in this kit can be purchased separately.
|
 |
Includes |
ABSK |
| APC15 - Anton 15mm pipe cutter |
• |
| APC22 - Anton 22mm pipe cutter |
• |
| APGT - Anton Gas torch set |
• |
| ASM - Anton Solder mat |
• |
| AFB - Anton Flux brush pk3 |
• |
| |
ACK15 - Anton 15mm Copperkey pipe preparation tool |
• |
| |
ACK22 - Anton 22mm Copperkey pipe preparation tool |
• |
| |
Bahco tool bag |
• |
| |
Price ex VAT |
£139.00 |
|
|
Anton ANSM non slip ladder saftey mat
Safety on ladders is paramount, one slip can result in serious injury, now there is a low cost anti-slip product designed to protect your greatest asset, you!!
|
 |
| Includes |
ANSM |
| Each mat 24 x 17cm (9” x 6 ½”) Maximum extra height 6.5cm (2 ½”) |
• |
| Price ex VAT |
£19.00 |
|
|
Don’t be left in the dark! Anton offers a range of professional/robust and affordable
lighting accessories to assist the engineer in his/her day to day work, providing high
quality light output assistance when needed the most, without costing a fortune in batteries.
|
 |
|
Whether you are working in a loft space, under floor boards or simply looking for tools in
the back of your van. Anton’s range of lamps from the AT5107 for precision controlled
lighting assistance, through to the larger lamps for bigger areas will leave you wondering
how you ever worked without them.
|
| Includes |
AT3000 |
AT2500 |
AT5107 |
| Lightweight LED headlamp with head strap |
|
|
• |
Rechargeable and cordless LED lamp
|
• |
• |
|
26 high intensity LED's delivering up to 1000 lux
|
• |
|
|
| 15 high intensity LED's delivering up to 650 lux |
|
• |
|
| Precision reflector providing wide angle light output |
|
• |
|
| Magnifier lens for a more focussed light output |
|
|
• |
| Lamp adjusts through 90° to focus on the job ahead |
|
|
• |
| Up to 6 hours of use between charging |
|
|
|
| Up to 4 hours of use between charging |
|
• |
|
| Up to 16 hours of use from 2 x (CR2016) batteries includes |
|
|
• |
| Polycarbonate lens - Virtually unbreakable |
• |
• |
• |
| Intergrated hanging hook or floor standing base |
• |
|
|
| Intergrated pocket / belt clip |
• |
• |
|
| 230v mains charger included |
• |
• |
|
| 12v car charger included or optional |
• |
Optional |
|
| Price ex VAT |
£49.00 |
£35.00 |
£9.50 |
|
|
In this age of hi-tech car accessories and their increasing popularity, the demands on
vehicle’s power resources are becoming stretched. With a wide range of us using satellite
navigation, radar detectors, mobile phones, Flue gas analysers and printers to name but a
few, and only having a limited number of 12v sockets available, leaves us needing more!
|
 |
| Includes |
AMS1 |
AMS2 |
AMS3 |
| Max (amps) |
|
|
8 |
Battery status indicator
|
|
• |
• |
Circular guidence light
|
1 |
2 |
3 |
| Mounting arms |
|
• |
• |
| Retractable coiled lead |
|
• |
• |
| Width adjustment fitment collar |
• |
• |
• |
| Number of sockets |
2 |
2 |
3 |
| Multi-positional adjustable 12v plug |
|
|
|
| Price ex VAT |
£4.99 |
£7.99 |
£8.99 |
|
|
Power 240v AC mains equipment directly from a 12v DC source using Anton’s power source
inverter: Whether you are looking to simply charge cordless power tools whilst on the
move, run your laptop or even light up the back of your van, the inverter will prove an
invaluable accessory. Also includes a USB charging slot for MP3, mobile phones and is
designed to fit most vehicle cup holders for your convenience.
|
| Includes |
AC150 |
| Converts 12v DC to 240v AC power |
• |
Suitable for equipment up to 150w
|
• |
Low battery shutdown protection
|
• |
| Overload / over voltage protection |
• |
| Fused protected |
• |
| LED power indicator |
• |
| Retractable coiled lead |
• |
| DC plug width adjustment fitment collar |
|
| USB charging socket for MP3 / mobiles etc |
• |
| Fits in your vehicle's cup holder |
• |
| Price ex VAT |
£39.00 |
|
 |
|
Anton have a wide range of accessories and consumables to accompany our extensive
product range. Please see table below to help you make your selection. Call our technical
help line if you require further assistance. |

|
| Includes |
ATM-5 |
ASP |
ASCC |
Spygas Case |
GCC/1 |
| Pouch for single instrument: Ideal for EX and APM range |
|
|
|
|
|
| Soft carry case for multiple instruments with shoulder strap |
|
|
|
|
|
| Protective pouch for Spygas range only |
|
|
|
|
|
| General hard carry case for instrument and probes |
|
|
|
|
• |
| 5m/16ft x 25mm Blade with magnetic end hook |
|
|
|
|
|
| Robust design supplied with hand loop & belt hook |
|
|
|
|
|
| Dual marked blade - metric & imperial |
|
|
|
|
|
| Two separate locks for improved blade control |
|
|
|
|
|
| Price ex VAT |
£4.00 |
£7.50 |
£16.50 |
£14.00 |
£23.00 |
|
|
 |
| Includes |
Sprinter |
PRB29003 |
C01296 |
FIL29001 |
AMTM |
ASP1 |
ASP2 |
| Spare Filters for Sprint range |
|
|
|
|
|
|
|
| Split chamber filter bowl complete |
|
|
|
|
|
|
|
| Car charger for Sprint/Sprinter |
|
|
|
|
|
|
|
| Spare paper rolls for Sprinter |
|
|
|
|
|
|
|
| Sprint V2 Gas leak detection probe |
|
|
|
|
|
|
|
| Magnetic infra-red reachargeable printer |
|
|
|
|
|
|
|
| Telescopic inspection mirror |
|
|
|
|
|
|
|
| Price ex VAT |
£139.00 |
£60.00 |
£12.00 |
£19.00 |
£4.50 |
£24.00 |
£26.00 |
|
|
Anton have a range of multi-purpose combination tools designed to make life easier.
Please use table below to help you make your selection. Call our technical help line if you
require further assistance.
|
 |
| Includes |
ARVTC |
AMPQK |
AMPRS |
AMPPK |
ASCS |
AERCS |
| 2x brass air vent bleed keys & zipped carry case |
• |
|
|
|
|
|
| 1/2 inch & 12mm hexagon double cranked radiator valve spanner |
• |
|
|
|
|
|
| 1/2 inch hexagon single cranked radiator valve spanner |
• |
|
|
|
|
|
| Fits 1/2 inch, 3/4 inch & 1 inch lockshield radiator valves |
• |
• |
|
|
|
|
| Fits gas and electric boxes |
• |
• |
|
|
|
|
| Fits tank connectors 15, 22 & 28mm internal & external |
• |
|
|
• |
|
|
| Fits radiator valves 1/2 inch hexagonal nut & internal lug type |
• |
|
• |
• |
|
|
| Holds new sink & basin waste whilst fitting |
• |
|
|
• |
|
|
| Fits 1/2 inch air vent plugs |
• |
|
• |
• |
|
|
| Fits air vent bleed key |
• |
|
• |
• |
|
|
| Fits radiator valves with square nut |
• |
|
• |
|
|
|
| Fits 1/2 inch black iron plug |
• |
|
• |
|
|
|
| Fits 1/2 inch plastic plug |
• |
|
• |
• |
|
|
| Fits 8-12mm radiator valves |
• |
|
• |
|
|
|
| Fits 11 & 12mm valves |
• |
|
• |
|
|
|
| Set of 9 stubby combination spanners (easier access in confined areas) |
|
|
|
|
• |
|
| Set of 9 extra reach combination spanners (extra long to reach in accessible areas) |
|
|
|
|
|
• |
| Spanner sizes include: 6, 7, 8, 9, 10, 11, 12, 13 & 14 mm |
|
|
|
|
• |
• |
| Made from quality chrome vanadium steel |
|
|
|
|
• |
• |
| Convenient holder for spanner storage |
|
|
|
|
• |
• |
| Price ex VAT |
£39.00 |
£5.00 |
£14.00 |
£14.00 |
£11.50 |
£15.50 |
|
|